Best carb cleaners
1. Acarte Carb Cleaner Tool Kit 2. CRC 05078 Throttle Body 3. Set of 4 Carb Cleaner
CHECK PRICE NOW! CHECK PRICE NOW! CHECK PRICE NOW!

A carburetor is a device fixed inside your engine which mixes air and fuel in the right ratio for internal combustion. It is a series of valves and varied measurements to ensure that your car does not blow up with a sudden rush of excess fuel.

While also letting the fuel come into contact with oxygen, it is like the heart of your engine. If dirt and sticky fuel come down your carburetor, then it may hamper the performance of the engine and may also lead to its failure at times.

Thus, proper cleaning of the carburetor from time to time becomes very essential. Here is where the best carb cleaners play a major role in tunning up the motorcycle. They remove any sticky gum or varnish that may be hindering the proper functioning of your bike’s engine.

SHOW ME THE TOP 12 MOTORCYCLE CARB CLEANERS NOW

Advantages of Cleaning your Carburetor 

Better Fuel Efficiency

Over a period of time, the parts of your carburetor can get choked by grease, sludge, oil, and various other unwanted substances. You will soon notice that the dirty carburetor stops the fuel from getting into your motorcycle’s engine.

This prevents combustion as your engine will be deprived of the fuel it actually requires. Consequently, this will lead to lower fuel efficiency and a lot of wastage. Sometimes, excessive dirt and gunge can make your motorcycle carburetor become completely inefficient.

Improved acceleration

You might face problems in starting your engine or accelerating it after starting. This can happen due to the low amount of fuel reaching the engine as the dirt might be blocking its way. This might also make it tough for the fuel to flow effectively in the motorcycle’s engine.

However, if the carburetor is properly cleaned, the bike will start in an instance and accelerate as smooth as butter!

Smooth Functioning

If you clean your carburetor after a long time or even for the first time, you will notice an unmatched difference. Your motorcycle will run like magic! I guarantee that you will spend time regretting your decision of not buying a carb cleaner earlier.

The Engine starts faster

Keeping your bike’s carburetor clean helps in starting the engine in a jiffy, as the fuel will now be flowing smoothly and with full efficiency.

How Do You Figure Out When Your Carburetor Needs Cleaning?

Here are some signs that alert you whenever your carburetor requires some extra attention:

Problem In Starting The Engine

If your engine has been acting all grumpy lately while starting and is giving you a tough time, then chances are your carburetor needs maintenance.

Due to dirt, the passage of the engine gets blocked because of which sufficient amount of air and fuel cannot travel through, thus causing the engine to turn over without an actual start taking place.

Excess Fuel

Due to a blocked or dirty carburetor, the amount of fuel reaching the engine increases and the air entering the engine becomes less than the required amount. This causes the engine to produce black smoke.

Excess Air

The engine may also get excess air and fuel in less amounts, which causes the engine to make a popping sound. The main reason behind this is a dirty carburetor.

Fuel overflow

The excess dirt and filth can prevent the needle valve from closing, which may result in the fuel overflowing from the carburetor and making the spark plugs wet.

How Does A Carb Cleaner Work?

Have you ever wondered how a carb cleaner entirely removes all the gunk bogging down small holes and orifices?

It uses a strong mixture of chemicals that works to break down all the stubborn dirt deposits from every part of your carburetor.

Sometimes just a little spray of this chemical is required. Other times, if the dirt is deeply stuck inside your carburetor, then letting the part soak in the cleaner would do the trick.

Thus, it is advisable to keep the carburetor clean so that these problems do not take place and interrupt the functioning of your engine.

Factors To Look Into While Buying the Best Carb Cleaners

Buying the perfect carburetor cleaner for your motorcycle can be a tough task with the vast number of products available in the market spanning various specifications and features. Some things that you should consider before buying a carb cleaner are-

Ease Of Use

The idea behind not visiting a local mechanic is to do the work yourself through these cleaning tools. But what’s the point when you have to spend hours understanding the instructions in order to start with the procedure? There is nothing good in spending hours in taking off just a tiny amount of gunk. So it is very important to ensure an ease of use in your carb cleaner.

Impact After Usage

One must always study the effect the product has after usage. It is better to invest in an effective product that lies within a higher price range than to invest in the same low price product again and again. However, some products falling in the low price range work very well. So there is a need to carry out enough research before buying.

Materials Used

If the parts around your carburetor are made with rubber and plastic, then it might be very dangerous to use a cleaner which does not work on such materials. In this situation, a multi-fabric cleaner would be the best alternative.

Speed

While some cleaners require the parts to be soaked overnight, other cleaners would just take a few minutes. In case your routine does not allow you to run the maintenance of your carburetor overnight, it is best to go with a cleaner that can do the job quickly without any difficulty.

Safety

Read the details of the product carefully. Some products might have an unwanted reaction on a few people. As these products can possibly harm sensitive parts of the body, it is best to go for a safe product.

Top 12 Best Motorcycle Carb Cleaners

1. Acarte Carburetor Carbon Dirt Jet Cleaner Tool Kit 10 Cleaning Needles with 5 Brushes

Acarte Carburetor Carbon Dirt Jet Cleaner Tool Kit 10 Cleaning Needles with 5 BrushesThese stainless steel brushes are made up of varied shapes and sizes in order to efficiently clean your engine carburetor and have a flexible handle that does not deform after usage.

The brushes used in this cleaning tool are made with high-density nylon so that you do not have to worry about any hair brushes falling off from these needles. A total of five cleaning needles and five cleaning brushes are provided, which are totally rust-free.

Being multi-purpose, you can use it to clean any ports or holes that require a wash. Customers have provided great feedback and have been using it on motorcycle, truck, and car engines.

All this comes at a very pocket-friendly rate, which undoubtedly makes it the perfect cleaning tool one can have!

Pros

  • Hassle-free
  • Rust-free
  • Flexible
  • Needles and brushes for varied usage
  • Does not deform
  • Multi-purpose
  • Very easy on the pocket
  • Hair of the brush does not fall off

Cons

  • Might not be able to clean very small jets or ports
CHECK THE CHEAPEST PRICE NOW!

2. CRC 05078 Throttle Body and Air-Intake Cleaner

CRC 05078 Throttle Body and Air-Intake CleanerThis cleaner helps remove gum and varnish from the valve and body of the throttle or carburetor. This helps clean the air intake and ensures the smooth functioning of your engine.

Made with low VOC formula, this cleaner is safe to use on coated throttle bodies.
However, while using this cleaner, always keep in mind to properly cover your nose and throat just to avoid any unwanted reactions.

You will notice a very smooth push once you use this spray on your engine. Instructions on the back of the bottle guide you on the recommended process to use this spray.

While an average carb-cleaning service charges you about $80, using this spray will put you down for less than $10! With such a reasonable price and excellent customer reviews, this product is definitely worth buying!

Pros

  • Easy to use
  • Quickly removes all the dirt and gum
  • Smooth functioning
  • Very reasonable price
  • Great consumer reviews

Cons

  • The straw has a problem fitting into the nozzle
CHECK THE CHEAPEST PRICE NOW!

3. Set of 4 Carburetor Carbon Dirt Jet Remove Cleaner

Set of 4 Carburetor Carbon Dirt Jet Remove CleanerThis set contains a total of 26 cleaning wires, 20 cleaning needles, and 10 nylon brushes. This set is sure to solve all your carburetor cleaning problems in one go.

It comes with a detachable key ring so that you don’t lose it and you’re able to properly hang or store the product.

The cleaning wires, needles, and brushes are made with stainless steel which is completely rust-free. The brushes are made with high-density nylon which assists in clearing out any dirt or grease that might be acting as an obstruction.

The spiral bristles have great accessibility resulting in a better reach. In order to ensure jets and carbs of all sizes get cleaned, each cleaning tool is designed with varied diameters so that you can easily suit your needs. So anything with small orifices can be easily cleaned with the help of this tool.

This product comes with a lightweight aluminium box in which you can store these cleaning wires. And guess what, all this comes for just under $10!

Pros

  • Cleaning tools of varied diameter
  • High-density and unbreakable nylon brushes
  • Made with stainless steel
  • Rust-free
  • Very affordable
  • Detachable ring and aluminium box for storage
  • Great accessibility
  • Excellent customer reviews
  • Easy to use

Cons

  • None that we can name!
CHECK THE CHEAPEST PRICE NOW!

4. WD-40 Specialist Carb/Throttle Cleaner, Fast-Acting Parts Cleaner, 13.5 OZ

WD-40 Specialist Carb Throttle Cleaner, Fast-Acting Parts Cleaner, 13.5 OZMade with dual action cleaning formula, the WD-4 cleaning spray works like magic on dirt and any residue that might be acting as a hindrance in your carburetor, throttle body, or any unpainted metal.

This breaks up tough carbon deposits and unwanted waste, leaving behind no residue. This spray ensures an improved performance and a smooth functioning of the engine.

Not just motorcycles, but it also works effectively on various types of vehicles and equipment like trucks, tractors, cars, lawn mowers, boats, weed trimmers etc.

This cleaning spray has been performing very well in the market, so you can definitely give it a try without any worries!

Pros

  • Easy to use
  • Dual action formula
  • Does not leave behind any residue
  • Can be used on multiple vehicles and types of equipment
  • Tough on carbon deposits
  • Ensures smooth functioning
  • Easy on pocket

Cons

  • Sensitive body parts might have an unwanted reaction, so make sure to use safety gloves and glasses.
CHECK THE CHEAPEST PRICE NOW!

5. Set of 2 Carburetor Carbon Dirt Jet Remove Cleaner 13 Cleaning Wires Set + 10 Cleaning Needles + 5 Nylon Brushes Tool Kit for Motorcycle ATV

Set of 2 Carburetor Carbon Dirt Jet Remove Cleaner 13 Cleaning Wires Set + 10 Cleaning Needles + 5 Nylon Brushes Tool Kit for Motorcycle ATVThese are perfect for clearing out narrow passages in motorcycle carburetors. The set with 10 cleaning needles, 13 cleaning wires, and 5 nylon brushes comes with a detachable key ring and an aluminium box for better storage.

This is made with durable stainless steel so that you don’t have to worry about any sort of deformation during usage. The high-density nylon brushes ensure that any hair does not fall off from the brush.

This is a great tool to clean hard-to-reach areas and small orifices. All this comes at a super reasonable rate, which is undoubtedly worth the buy!

Pros

  • Stainless steel
  • Rust-free
  • High-density nylon brushes
  • Affordable
  • Varied diameters
  • Reaches small orifices
  • Excellent customer reviews

Cons

  • No drawbacks found!
CHECK THE CHEAPEST PRICE NOW!

6. Gumout 800002231-6PK Carb and Choke Cleaner

Gumout 800002231-6PK Carb and Choke CleanerThis cleaning spray cleans tough deposits and dirt from inside the carburetor’s body. After usage, your engine performance and fuel economy are destined to improve like never before.

All kinds of gum, varnish, dirt and gunk trying to hamper the smooth functioning of your engine will be eliminated in no time. It helps clean unpainted metal parts and choke valves.

Using this product will help you get over engine problems like stalling, hard starting, rough idling, and high exhaust emissions. Although you can use this while the engine is on or off, make sure that you turn the engine on when spraying down the carburetor’s throat.

This is truly one of the top cleaning products available in the market with the best customer feedback.

Pros

  • Improves engine performance
  • Ensures fuel economy
  • Great quality
  • Non-chlorinated carburetor cleaner
  • Quick drying
  • Helps overcome engine-related problems
  • Excellent customer reviews

Cons

  • Highly flammable
  • Does not have a low VOC
CHECK THE CHEAPEST PRICE NOW!

7. Paneltech Carburetor Carbon Dirt Deposit Remove Cleaning Cleaner Tools

Paneltech Carburetor Carbon Dirt Deposit Remove Cleaning Cleaner ToolsWith 10 cleaning needles and 5 cleaning brushes, this set makes up a perfect cleaning tool for clearing out gunk from carb passages, jets, and orifices. This cleaning tool is also useful for cleaning spray guns, nozzles, air tools, camping stoves, etc.

The stainless steel body of this cleaning tool ensures durability while the nylon brushes are breakage-free. For easy accessibility and storage, this tool comes with a detachable ring and a plastic case.

Pros

  • Very affordable
  • Rust-free
  • Durable
  • Breakage-free
  • Tools of varied diameters

Cons

  • Does not fit small orifices
CHECK THE CHEAPEST PRICE NOW!

8. Northtiger Red Carburetor & Power Boost Bottle & Air Filter Fit 49/60/66/80cc Motorized Bike

Northtiger Red Carburetor & Power Boost Bottle & Air Filter Motorized BikeThis amazing replacement set is probably the best solution if you are facing unending engine-related problems. It includes a carburetor, an air filter, a throttle line, a power boost bottle, and an intake manifold.

Made with high quality materials, these replacement parts can fit a 49cc, 60cc, 66cc, and 80cc motorized bike. At a very economical rate of under $40, this set is absolutely what you’ve been looking for!

Pros

  • High quality
  • All necessary replacement parts included
  • Economical rate
  • Fits 49cc, 60cc, 66cc, and 80cc bikes
CHECK THE CHEAPEST PRICE NOW!

9. Ridgeyard Carburetor Carbon Dirt Jet Remove Tool Kit 10 Cleaning Needles + 5 Brushes Universal for Motorcycle Suzuki ATV Auto Power Sport Carb

Ridgeyard Carburetor Carbon Dirt Jet Remove Tool Kit 10 Cleaning Needles + 5 Brushes Universal for Motorcycle Suzuki ATV Auto Power Sport CarbThis set comes with 10 cleaning needles and 5 nylon brushes for clearing out obstructions from carb passages, vaults, and jets. It is made with a durable stainless steel material which does not deform on usage.

The nylon brushes are breakage-free and the detachable key ring can be used for hanging. In addition, the plastic case can be used for better storage and accessibility.

The best part is that all this comes at an unbelievably cheap rate of under $5!

Pros

  • Easy accessibility
  • Durable
  • Breakage free
  • easy storage
  • Ideal for motorcycles
  • Does not deform
  • Very cheap rate
CHECK THE CHEAPEST PRICE NOW!

10. GeekerChip Carburetor Carbon Dirt Jet Cleaner Small Wire BrushTool Kit with 10 Cleaning Needles & 5 Brushes (Black and Silver)

GeekerChip Carburetor Carbon Dirt Jet Cleaner Small Wire BrushTool Kit with 10 Cleaning Needles & 5 Brushes (Black and Silver)This cleaning tool comes with 10 cleaning needles and 5 brushes of varied diameter (2mm, 3mm, 4mm,5mm and 7mm). Made with high density nylon, these brushes are absolutely breakage-free. The high quality stainless steel used in this tool ensures anti-deformity.

This is a multi-purpose tool and can be used to clean any small orifice that has accumulated unwanted gunk. The detachable key ring helps in conveniently hanging and storing this tool.

Pros

  • Durable
  • High density nylon brushes
  • Multiple diameter
  • Multi-purpose
  • Anti-deformity
CHECK THE CHEAPEST PRICE NOW!

11. Ambienceo Carburetor Carbon Dirt Jet Remove Cleaning Cleaner Tool Kit

Ambienceo Carburetor Carbon Dirt Jet Remove Cleaning Cleaner Tool KitThis set comes with 10 cleaning needles and 5 nylon brushes for clearing out obstructions from carb passages, vaults, and jets. It is made with a durable stainless steel material which does not deform on usage.

The nylon brushes are absolutely breakage free. The detachable key ring can be used for hanging and the plastic case can be used for better storage and accessibility. The best part is that all this comes at an unbelievably cheap rate of under $5!

Pros

  • Easy accessibility
  • Durable
  • Breakage free
  • easy storage
  • Ideal for motorcycles
  • Does not deform
  • Very easy on the pocket
CHECK THE CHEAPEST PRICE NOW!

12. Cyclo – Carb Clean

Cyclo - Carb CleanThis spray works like magic when it comes to repairing small engines, making it one cleaner that you would want to have for all your cleaning purposes. It cuts through all the gum and gunk in your carburetor that won’t come off easily.

Although it is oxygen sensor safe, it is advisable to use it in a hot environment since, like all other carb cleaners, it is extremely flammable
.
This product meets all VOC requirements and can be used on PVC valves, linkages, automatic chokes, carburetors, throttle plates etc.

Pros

  • Fast working formula
  • Removes gum and varnish
  • Oxygen sensor safe
  • Powerful solvent spray

Cons

  • Not guaranteed rubber and plastic safe
CHECK THE CHEAPEST PRICE NOW!

Our Top Pick

You must be curious to know about our choice if we had to pick one among all the top ten carb cleaners mentioned in the list. Well, we would definitely zero down on Gumout’s carb and choke cleaner if we had to.

This cleaning spray keeps not only the carburetor clean but also unpainted metals, chokes, linkages and valves. It certainly improves the overall condition of your engine by avoiding any chances of a rough start, rough idling, or stalling.

Many users have claimed that their fuel economy increased significantly after using this product. When it comes to safety, this cleaner keeps those high exhaust emissions away. Most importantly, it is super easy to use!

It is advisable to apply this cleaner when the engine is still running. Gumout Carb Cleaner is suitable for ATVs, utility vehicles, lawnmowers, weed eaters, generators, bikes for off-road and road use, marine and water boats, snowmobiles, and numerous more.

Now that you have the list of carb cleaners that you can choose from, I’m sure you still might have some unanswered questions. Here are the answers to some important questions for the perusal of anyone seeking to buy a cleaner for their motorcycle’s carburetor:

What Are Chlorinated And Non-chlorinated Carb Cleaners?

Chlorinated carb cleaners are known to be more powerful than the non-chlorinated ones. However, chlorinated cleaners can lead to wearing out.

It is best to use chlorinated cleaners for large parts that require to be soaked and are more durable without being made out of soft substances.

On the other hand, for small valves and injectors, it is advisable to use a non-chlorinated cleaner since it is less likely to cause damage to the small and fine parts of the motor.

What Is A Carburetor Cleaner Made Up Of?

The contents of a carburetor cleaner may vary depending on the product and the company, but the ingredients are, most of the time, obtained from petroleum. This petroleum is either brought in from geographical sources or is derived from a chemical compound.

Acetone and Xylene are solvents used in making a carb cleaner. Xylene is a chemical liquid which is a by-product of petroleum and coal tar. Methyl ethyl ketone is used for removing gunk and grease by utilizing its cleaning properties.

Sticky and flammable substances are removed with the help of ethylbenzene. Toluene is also present in these carburetors in addition to some amount of propane and 2-butoxyethanol.

Are Carburetor Cleaners Actually Effective?

Yes, these carb cleaners work impressively well in maintaining a healthy state of your motorcycle’s carburetor. However, this is just a part of maintaining your bike and cannot be the sole remedy that fixes all problems plaguing your ride.

It is essential for the fuel filter to be changed from time to time using high-grade fuel additives and gasoline with the right octane rating. Keeping in check all these factors will contribute majorly in helping you maintain a smooth engine.

When these cleaners are added to fuel, they pass through the carburetor or injector and loosen and remove all varnish deposits that get accumulated over time.

Through engine combustion, the sediments are burned, giving rise to a noticeable difference in the way your vehicle functions.

How To Clean A Carburetor?

We’ve talked a lot about why it is important to clean the carburetor and the products using which you can do so. Now let’s see what procedure is involved in clearing out gunk from the carburetor through a carb cleaner.

Materials Required:

  • Screwdriver
  • Needle nose pliers
  • Wire brush
  • Wrenches or socket set
  • Carb and choke cleaner
  • Carburetor and parts cleaner (optional)

Step 1 – Remove the carburetor

Turn the valve off on the fuel tank and remove the carburetor. Pick out the fuel line and remove the hose and the overflow hose coming out of the carburetor.

Now, in front of the rear of the carb, you will find a clamp. Loosen its screws and the carburetor should become loose. After that, remove it.

Remove the throttle cable by twisting its top cap. After unscrewing, it will come off but the slide would still be attached. After the carb, remove the throttle slide. Once the cable is unhooked, everything can be easily pulled off.

Step 2 – Remove the float

The bottom part of the carburetor ‘float’ is the first thing to come off when cleaning the carb. Unscrew the screws on the bottom of the carb and remove the float bowl.

With a pair of nose pliers, remove the float pin by pulling it out. In some carburetors, the float has a needle hanging on it so that it can come out easily.

Step 3- Remove the jets

Jets are the screws with holes in the centre. Fuel flows through them to get mixed with air. In order to get the jets, the plates need to be removed. The jets will need a flat head screwdriver to be removed

Step 4- Remove outer parts

Remove the last parts from the outside. Remove the air screw, idle screw, and choke.

Step 5 – Cleaning

Before cleaning the carb, remove all the gaskets and O-rings. The easiest way to clean the carb is to soak it in the cleaner, but this can be quite expensive.

Parts can also be cleaned by spraying the cleaner. For this, wear safety gloves and use a wire brush to scrub and remove gunk.

After this, spray the carb cleaner all over. While spraying on jets and small orifices, make sure that the dirt is removed. If not, use compressed air to do the same.

After every possible dirt particles are removed and the cleaner is sprayed, thoroughly dry the parts. After drying, re-install the gasket and the O-rings.

Step 6- Put everything back in place

This step involves putting the jets, screws, choke, float bowl, throttle, etc. back in place to ready the carburetor for installation.

Best Carb Cleaners: What’s Your Choice?

Using carb cleaners is an essential aspect of maintaining your vehicle. If you have a newer bike, just spraying and drying the carburetor superficially would do the work. However, if it is an older model, its parts may require to be soaked in the cleaner for a while.

It also depends on whether you want to perform a quick run-through for a limited number of days or a proper once-and-for-all cleanup. Decide your motive, work out your needs, and then figure out which carb cleaner would suit your bike the best.

Regular cleaning will keep your bike happy and reduce those unnecessary trips to a garage.

And as we all know, a happy vehicle always equals a happy owner!